Peel Away 8
Acrylics – Polyurethanes – Marine – EpoxyOne application removes multiple layers of paint
Peel Away is a revolutionary patented concept in paint removal. The Peel Away system has been specially formulated to remove multiple layers of paint in one clean fast application.
- Removes up to 20 layers in one application
- Provides safe lead and Asbestos paint removal
- No toxic fumes
- less labour intensive
- Preserves most substrates
- Removes multiple coats of architectural and tough industrial coatings from virtually all surfaces.
Use Peel Away 8 On
Don't Use On
Peel Away® is a revolutionary patented concept in paint removal. The Peel Away® system has been specially formulated to remove multiple layers of paint in one clean fast application. Peel Away offers a concise range of products to satisfy most stripping requirements. Numerous projects have successfully used the Peel Away® system in the past 28 years.
Peel Away® provides innovative solutions for paint removal. With our special laminated paper sheets it completely seals the stripping process preventing atmospheric pollution and contamination. It is safe for the removal of all types of paint including Lead paints, saving the environment by fully containing the waste. The products do not contain harmful solvents which reduces risks to our health.
It WorksThe product is a thick paste that is applied to a painted surface and covered with our special laminated paper. The product is sealed in and will emulsify and soften the many layers of paint over a period of time. The laminated paper sheet is then peeled away with the paint carefully, ready for disposal. The surface is then washed with water.
Watch The Video
See how easy it is to use Peel Away 8 in this short 1 minute video.
Step 1Trial Patch – ALWAYS PERFORM A TRIAL PATCH BEFORE EVERY JOB! An evaluation should always be completed before undertaking any paint removal project. All surfaces vary and may have many different layers of paint. 350g Kits are available from our store online or authorised distributors around Australia. Please refer to our guides on how to perform a trial patch.
Step 2Apply Peel Away ® paste 3-4mm thick (recommended rate) to the painted surface evenly. Then cover the Peel Away® with the supplied special laminated Peel Away® paper, printed side facing out. Use masking tape to tape down all sections and edges as best you can to create an air-tight seal, which allows Peel Away to work at maximum strength. Most surfaces you will need to leave on for 72 hours. In some cases with very old or heritage listed buildings it may require 7 days for optimal results.
Step 3Remove the Peel Away® from the surface by gently sliding a spatula/scraper behind the paper and ease the paint, paste and paper off in one piece. Remove in small sections and scrape off loose debris and residue. Wash the surface thoroughly with water, nylon brush and sponge.
Removal of anti-fouling paints below the water line only.
Apply Peel Away® 2mm thick, cover with laminated paper and seal the edges with masking tape.
Dwell time should be between 8 to 24 hours only. Remove carefully and wash down the surface. This will not affect the epoxy gel coat. For further details, please refer to our guide and if unsure please contact the Peel Away® office before you proceed.